Carpet Cleaning Process

Our technician will do a walk-through inspection with you to identify soiling conditions, carpet construction, and potential permanent stains.
Your carpet is pre-vacuumed with a commercial vacuum, to remove bonded and soluble dry soil.
Sofas, chairs, and tables will be carefully moved. Larger pieces such as beds and dressers are left in place under our regular pricing structure. Furniture will be protected with disposable blocks and tabs.
Certain spots are pretreated for maximum removal
Traffic areas are pre-treated with a biodegradable traffic lane treatment.
Your carpet will be pre-groomed with a carpet groomer or rotary cleaning machine, depending on soil level, to further to loosen traffic area soil.
Once the soil has been loosened, our state of the art truck-mounted hot water extraction cleaning process will thoroughly flush the carpet pile. Pressure and heat are regulated to prevent the carpet from being over wet.
The PH is balanced on every carpet and fabric cleaned. This is one of the most important steps according to the manufacturers of carpet. It is accomplished during the extract and rinse process, or a post spray will be applied.
If any spots are not removed during the cleaning process, specialty spotting techniques are employed. However, potential permanent stains, as identified by the technician, may not be removed.
The carpet pile is set in one direction to aid the drying process.
High velocity air movers are placed on the carpet to lessen the drying time.
Our technician will walk through your home with you to point out the cleaning results and make sure you are completely thrilled with the job.